The WaterBlade features a soft, 12" non-scratch silicone blade that is designed to safely remove water from almost any surface. The hand held WaterBlade conforms to surface contours, which significantly helps reduce the time and effort it takes to remove liquids from surfaces. Its ergonomic design makes it easy to hold and operate. It also features tapered sides and a gentle silicone blade that won't scratch surfaces making it safe for all paint finishes, fiberglass, windows and more. The WaterBlade is great for cars, trucks, vans, RV's, boats, house windows, shower doors and other surfaces around the home.
Dries your vehicle in one-third of the time.
Patented T-Bar edge quickly whisks away water.
Soft silicone blade will not scratch painted surfaces.
Flexible blade molds to the shape of the surface.
15 times less friction than terrycloth & microfiber towels.
Hundreds of uses around home and shop.
Made in USA.
For Best Results
Thoroughly wash and rinse your vehicle before using this product, including any recessed areas, grooves and openings to wash away any foreign materials.
Make sure that any dirt or abrasive material has been removed; these materials can cause damage to the vehicle while using the WaterBlade.
The handle of the WaterBlade should never come in contact with the vehicle, it can potentially cause damage. Only the blade should come in contact with the surface.
Begin drying with the WaterBlade before water has dried to prevent spotting.
The WaterBlade should not be used on a dry surface.
When using the WaterBlade, only moderate pressure is required to remove the water; the soft, silicone blade will mold to the shape of the car. A small amount of additional pressure may be required for ridges, peaks or extreme contours.
Begin drying from the top down to minimize dripping water. Finish drying process with a micro-fiber towel in grills, creases, etc.
Caring for the WaterBlade
- Wash and rinse your WaterBlade before each use.
- Silicone blade of the WaterBlade should be protected when not in use. Be careful of sharp objects and edges so that surface of blade is not damaged.
Can the WaterBlade be used on any surface other than a car body or windows?Yes, the WaterBlade is also great for windows, counter tops, showers, shop surfaces, solar panels and a variety of other household uses.
Can the blade on the WaterBlade be replaced?The 12” silicone blade is not sold separately.
How easy to use is the WaterBlade?When using the WaterBlade, only moderate pressure is required to remove the water. The soft, silicone blade will mold to the shape of the car. A small amount of additional pressure may be required for ridges, peaks or extreme contours.
How is the WaterBlade better than a standard squeegee?It dries a surface area in one-third of the time and causes fifteen times less friction. Medical grade silicone and patented T-bar edge conforms to every contour of the surface area to remove over 90% of the rinse water safely and effectively.
Will the WaterBlade have a negative impact on my freshly waxed vehicle?No, the WaterBlade can also be used with wet wax. The T-bar edge smooths the wet wax into the micro-pores of the paint for a perfect finish in no time. Use your microfiber towel if needed to polish to a high luster.